Laparoscopy Hook Scissor: 12mm Advanced, Precise Cutting( R Pro Series )
Product Details
Hook Scissor: 12mm Advanced, Precise Cutting
The Hook Scissor is designed for controlled cutting and tissue dissection during laparoscopic procedures that require precision and careful instrument positioning. Its distinctive curved hook tip is intended to help stabilize tissue during suitable dissection maneuvers, while the cutting blades support tissue division when appropriate for the task. The insulated 5mm shaft is specified for use with compatible monopolar electrosurgical equipment, subject to the manufacturer's validated operating limits. Cryogenically treated blades are specified to support edge durability, while textured finger grips help with instrument handling and control. With a 12mm tip length and reusable construction, the Hook Scissor is intended for consideration in laparoscopic myomectomy, adnexal surgery and vascular dissection when its dimensions and approved use are suitable.
Key Features of the Hook Scissor
1. Curved hook tip for tissue stabilization
The Hook Scissor features a distinctive curved hook tip designed to help engage and stabilize tissue during appropriate dissection tasks. This geometry provides an alternative to a conventional straight or simply curved scissor tip.
The hook configuration can be considered when selecting an instrument for controlled tissue positioning. Its suitability depends on the tissue, surgical approach and the instrument's intended use.
2. Monopolar compatibility up to 100W
The supplied specifications describe the Hook Scissor as monopolar compatible up to 100W. The insulated 5mm shaft is an important feature to evaluate when selecting an instrument for a compatible electrosurgical setup.
The exact operating limit depends on the instrument's validated specifications and compatible equipment. Confirm the approved power rating, insulation integrity, connector configuration and instructions before clinical use. Do not assume that the maximum stated power is appropriate for every procedure or operating mode.
3. Cryogenically treated blades
The product information specifies cryogenic blade treatment intended to support durability and edge retention during repeated use. Blade condition is an important consideration for reusable surgical scissors.
The supplied claim that the blades remain sharp through hundreds of procedures should be supported by durability testing before being presented as a verified performance guarantee. Actual cutting performance also depends on use, inspection, maintenance and reprocessing.
4. German stainless steel construction
The blades are specified as German stainless steel. Material origin and grade are relevant product-selection details for hospitals and procurement teams. Confirm the exact steel grade and material documentation with the manufacturer before publishing more specific material claims.
5. Textured finger grips for control
The textured finger grips are designed to support handling and instrument control during cutting and dissection. A secure handle interface is useful when positioning the instrument for controlled movements.
Comfort and handling depend on the operator, technique and procedure duration, so the handle design should be considered alongside the full instrument configuration.
6. 12mm tip length
The specified tip length is 12mm. This dimension helps surgical teams compare the instrument with other laparoscopic scissors and assess whether its tip geometry is appropriate for the intended task.
7. Reusable construction
The Hook Scissor is specified as reusable. Cleaning, inspection, maintenance and sterilization must follow the manufacturer's validated instructions for use. The cutting edges and electrical insulation should be inspected according to the specified maintenance procedures.
Hook Scissor for Controlled Laparoscopic Dissection
The Hook Scissor combines a curved hook-tip configuration with cutting blades, providing features for evaluation when an operation calls for both tissue engagement and cutting. The hook tip is intended to help stabilize tissue during appropriate maneuvers, while the blades perform the cutting function.
Its insulated 5mm shaft adds a further consideration when choosing a monopolar-compatible instrument. Before use, the surgical team should verify the exact electrical specifications and ensure that the selected equipment is compatible with the instrument.
These features do not guarantee a specific surgical outcome or eliminate the risk of tissue injury. Correct instrument selection, technique and compliance with the manufacturer's instructions remain essential.
Applications in Gynecological and General Surgery
Laparoscopic myomectomy
Myomectomy involves the surgical removal of uterine fibroids. The Hook Scissor may be considered for suitable dissection and cutting tasks where its curved tip, dimensions and intended use meet the procedure's requirements.
Adnexal surgery
Adnexal procedures involve structures such as the ovaries and fallopian tubes. The curved hook-tip design and cutting blades are features to evaluate when selecting an instrument for the appropriate surgical task. The choice should be based on the procedure, anatomy and surgeon's technique.
Vascular dissection
Vascular dissection requires careful instrument selection around blood vessels and nearby structures. The Hook Scissor's defined tip geometry and cutting function may be relevant for specific tasks when the instrument is approved for that use. Confirm its intended use and technical characteristics before selecting it for vascular work.
Hook Scissor Specifications
| Specification | Details |
|---|---|
| Product name | Hook Scissor |
| Tip design | Curved hook tip |
| Tip length | 12mm |
| Shaft diameter | 5mm |
| Blade treatment | Cryogenic treatment, as specified |
| Material | German stainless steel, as specified |
| Electrosurgical compatibility | Monopolar, up to 100W as supplied; verify documentation |
| Handle design | Textured finger grips |
| Reusable | Yes |
| Ideal applications | Laparoscopic myomectomy, adnexal surgery and vascular dissection |
Why Consider the VOGEL Hook Scissor?
When comparing laparoscopic scissors, surgical teams should assess tip geometry, cutting-edge characteristics, shaft diameter, insulation, electrosurgical compatibility, handle design and intended use. The Hook Scissor combines a curved hook tip with an insulated 5mm shaft, cryogenically treated blades and textured finger grips in a reusable configuration.
These specifications provide practical comparison points for hospitals, surgical centres and medical procurement teams. Before purchase or clinical use, confirm the full instrument dimensions, material specifications, permitted power settings, compatibility and validated reprocessing instructions.
Explore the VOGEL laparoscopy instrument range to compare laparoscopic scissors, graspers, dissectors, forceps and other minimally invasive instruments. VOGEL's published instrument range covers specialties including general surgery, gynecology, urology and pediatric surgery.
For gynecology-related instruments, also explore the VOGEL gynecology range. For technical specifications, quotations and institutional purchasing enquiries, visit the VOGEL contact page.
Frequently Asked Questions
What is a Hook Scissor used for?
Based on the supplied product details, it is intended for laparoscopic myomectomy, adnexal surgery and vascular dissection when its design and approved use are appropriate for the procedure.
What is the purpose of the curved hook tip?
The curved hook tip is designed to help stabilize or engage tissue during suitable dissection maneuvers. Its use depends on the tissue and surgical task.
What is the tip length of the Hook Scissor?
The specified tip length is 12mm.
Is the Hook Scissor compatible with monopolar electrosurgery?
The supplied specifications state monopolar compatibility up to 100W. Verify the approved operating limit, insulation and compatible equipment using the manufacturer's instructions before use.
What material is used for the blades?
The product description specifies German stainless steel with cryogenically treated blades. Confirm the exact steel grade and treatment specifications with the manufacturer.
Is the Hook Scissor reusable?
Yes. It is specified as reusable. Follow the manufacturer's validated instructions for cleaning, inspection, maintenance and sterilization.
Package contents for Laparoscopy Hook Scissor: 12mm Advanced, Precise Cutting( R Pro Series ) have not been specified. Please confirm the supplied items and accessories before ordering.
For shipping, returns and applicable conditions, please read our Returns & Refunds Policy.
Are these instruments autoclavable?
Yes. Every VOGEL instrument is fully autoclavable and built for repeated sterilization cycles.
Do you supply in bulk to hospitals and distributors?
Yes. Institutional and distributor pricing is available — contact our sales team with your requirement list.
Is a GST invoice provided?
A GST-compliant invoice is issued with every order.






